by AdminWes » Wed Nov 23, 2011 3:14 pm
Thanks. It does look like there is a corner case in MobiLinc that is preventing commands from going out where there is only X10 devices in MobiLinc.
There is a work around.
- Log into your SmartLinc's web page.
- Click the Wrench with the box Icon in the lower Left corner.
- Pick any room and name it "Dining Room" or anything else.
- Check "Show Room".
- Click "Save and Return".
- Verify that your room now appears in the web page.
- Click on the Room and verify that you have at least one scene listed in that room.
- In MobiLinc go to My Setting->Lighting Controller.
- Tap the Sync Button and select Update Only.
- Once complete, go back to My Scenes.
- Verify that you have your scene here now.
- Go to My Devices and select your X10 device.
- Tap the ON/OFF button and see if the iPhone network indicator is now spinning sending traffic to your SmartLinc. Also look to see if the SmartLinc's Blue LED now flashes on commands from MobiLinc.
Please give this a try and let me know if this works for you or not.
Wes