Mobile Integrated Solutions

Hello, I have a Hikvision DS-9000HQHI-SH Series Hybrid 32-Channel DVR and run a mix of analog and IP cameras on it. There are 18 cams in total, and I would love to be able to hit some of the analog ones off the Hikvision NVR if the plug-in would allow it somehow.

I have been able to get four of my Hikvision IP cams to show up in the plug-in, but not the DVR so far. Also I have a high-end Hikvision DS-2CD4332FWD-IZHS cam that the plug-in thus far has not shown. Could be user error in the case of that cam and the DVR.

Just wanted to check to see if it should be possible to connect these or not before potentially wasting more time.

Thanks in advance!
Lee

Hi Lee,

MobiLinc uses the open standard RTSP to connect to modern cameras/DVRs. If you have the full RTSP path to each camera, let me know what that looks like so I can confirm or get support added for you. RTSP looks like: rtsp://ip-address/camera/1 or similar starting with rtsp://

Wes