Page 1 of 1

Devices not show.

PostPosted: Sun Jul 08, 2012 11:06 am
by Ferran
Hey.
I have v3.09.00 HS MobiLinc installed on my iPhone.
The x10 devices are not shown, but a few.
I tried to change some kind of device, but nothing.
Any ideas?
Thank you.

Re: Devices not show.

PostPosted: Mon Jul 09, 2012 8:27 am
by AdminWes
Hi Ferran,

Usually the reason for devices not appearing is that special characters are used that are outside of valid XML. Please verify that your device names use only these characters:
a-z
A-Z
0-9

Characters like & cannot be used.

Wes

Re: Devices not show.

PostPosted: Mon Jul 09, 2012 2:19 pm
by Ferran
Thanks for responding. I use the characters you mention. As commented in the previous post, there are devices that, if shown. I do some canbio intetado, but have received nothing.
Thanks.

Re: Devices not show.

PostPosted: Tue Jul 10, 2012 7:40 am
by AdminWes
Hi Ferran,

I apologize, but I did not follow your response. It looks like auto-correct may have manged what you were attempting to communicate. Can you please rephrase your question?

Wes

Re: Devices not show.

PostPosted: Wed Jul 11, 2012 3:35 am
by Ferran
Hi Wes.
Sorry I can not speak English, I use Google translator.
Well, as I commented, only appear several devices.
The characters are correct.
I've tried some things but I got no results (change location, change direction X10 ...).
All the devices I use are X10.
Do not know what else I can try.

Thank you very much for your help.

Re: Devices not show.

PostPosted: Thu Jul 12, 2012 11:53 pm
by Ferran
No solution?

Re: Devices not show.

PostPosted: Sat Jul 14, 2012 12:43 am
by Ferran
Hi Wes, I restart HomeSeer and devices appear.
So far everything is working properly. ;)

Thanks for your help.

Re: Devices not show.

PostPosted: Sun Jul 15, 2012 5:57 am
by AdminWes
Hi Ferran,

Great! Glad you were able to figure it out.

Thanks for the update.

Wes