Page 1 of 1

On/Off and Dim (0-100%) seems to be all that there is?

PostPosted: Thu Sep 15, 2011 11:19 am
by chriscouture
Just installed and I really like what I see but I have a question. I have several devices that don't live in the "0% is off and 100% is on" world. For example, my alarm system (HAI) has 0=off 3 = Armed Away etc. Is there any way to have the system work where it can send a 3 to arm in away and also to report that that device is armed away when the status is a 3? Right now it shows Security Status 3% when armed and Off when it's disarmed.

I don't mind fiddling around in code if needed but it sure would be nice to have an option under the devices where you could set up things like this.

Thanks,

Chris

Re: On/Off and Dim (0-100%) seems to be all that there is?

PostPosted: Fri Sep 16, 2011 7:08 am
by AdminWes
Hi Chris,

HS MobiLinc does not have this kind of an option. This is a specialty device where specific values mean something to that device. My recommendation would be to create an event(s) that sets that device to the values you need. That way in HS MobiLinc you can control the Event and the device does what it needs to do for your setup.

Does that help?

Wes

Re: On/Off and Dim (0-100%) seems to be all that there is?

PostPosted: Thu Sep 29, 2011 7:29 am
by chriscouture
Thanks Wes, I didn't think I would be able to change this so I want ahead and used the events.