Z-Wave devices

Post your new feature requests here!

Z-Wave devices

Postby andyf0 » Tue Jun 10, 2014 3:24 pm

Hi Wes,

UDI is adding support all the time for new Z-Wave devices. A lot of these devices reports multiple device information such as a sensor ON/OFF status along with battery level. I'm thinking specifically of the Aeon MultiSensor which has two nodes. One reports motion on/off and battery level and the other reports Temperature, Humidity and Lumins (lux). It's really a pain to open up the Admin Console on the ISY to see these values. Hopefully you're working on a solution for these type of devices?
andyf0
 
Posts: 92
Joined: Mon Mar 07, 2011 12:55 pm

Re: Z-Wave devices

Postby AdminWes » Wed Jun 11, 2014 5:01 pm

Hi Andy,

Yes, but we're moving slowly on these additional features like battery level as we weigh our priorities moving MobiLinc forward.

Wes
AdminWes
Site Admin
 
Posts: 2103
Joined: Sat Feb 07, 2009 2:52 pm

Re: Z-Wave devices

Postby MechEng70 » Wed Apr 08, 2015 1:21 pm

Wes,

Any update on adding some of these features? Ie temp, battery level, etc...


-Jason
MechEng70
 
Posts: 13
Joined: Wed Nov 26, 2014 5:47 pm

Re: Z-Wave devices

Postby AdminWes » Wed Apr 08, 2015 3:03 pm

Hi Jason,

Thanks for checking in. Unfortunately no updates I can share at this time.

Wes
AdminWes
Site Admin
 
Posts: 2103
Joined: Sat Feb 07, 2009 2:52 pm

Re: Z-Wave devices

Postby jdsmeak » Wed Jun 15, 2016 10:17 am

How do I select what I wish to display on the dashboard for a device such as the Everspring ST 814-2? I have two of them, one that I wish to be able to display temperature from and one that I wish to display humidity from on the Mobilinc dashboard, but I cannot seem to figure out how to get it to display as such. It seems that Mobilinc displays the "Status" of the device, which currently aligns with Humidity level on both devices. Any idea on how to address? Any assistance would be very much appreciated!
User avatar
jdsmeak
 
Posts: 5
Joined: Wed Jun 15, 2016 10:13 am

Re: Z-Wave devices

Postby AdminWes » Thu Jun 16, 2016 7:33 am

Hi jdsmeak,

Z-Wave devices have a primary reporting value and that's the value that gets surfaced up to the Dashboard. There is room for improvement here to allow you to pick what sub-value of the Z-Wave device is shown on the Dashboard.

Wes
AdminWes
Site Admin
 
Posts: 2103
Joined: Sat Feb 07, 2009 2:52 pm

Re: Z-Wave devices

Postby jdsmeak » Thu Jun 16, 2016 12:10 pm

Any timeline to be able to select the secondary reporting value? Would make your app a lot more useful for many of us!


Sent from my iPhone using Tapatalk
User avatar
jdsmeak
 
Posts: 5
Joined: Wed Jun 15, 2016 10:13 am

Re: Z-Wave devices

Postby AdminWes » Sun Jun 19, 2016 1:55 pm

Hi jdsmeak,

I don't have a timetable, but I've passed this along internally.

Wes
AdminWes
Site Admin
 
Posts: 2103
Joined: Sat Feb 07, 2009 2:52 pm

Re: Z-Wave devices

Postby jdsmeak » Tue Jun 28, 2016 8:38 pm

Wes, thank you!


Sent from my iPhone using Tapatalk
User avatar
jdsmeak
 
Posts: 5
Joined: Wed Jun 15, 2016 10:13 am

Re: Z-Wave devices

Postby jdsmeak » Thu Feb 09, 2017 9:00 am

Hi Wes, any update on this z-wave sensor technology feature set for MobiLinc?


Sent from my iPhone using Tapatalk
User avatar
jdsmeak
 
Posts: 5
Joined: Wed Jun 15, 2016 10:13 am

Next

Return to New Features for MobiLinc HD

Who is online

Users browsing this forum: No registered users and 1 guest

cron