Not showing Remote Linc2 controller properly

Post your MobiLinc comments and feedback here.

Not showing Remote Linc2 controller properly

Postby pauliep » Thu May 17, 2012 4:07 pm

Can anyone enlighten me as to how to change the display of my Remote Linc2 from eight on/off controllers to a scene controller that has all eight buttons on one "light switch" like I have seen in the promo material for MobiLinc? I would appreciate any help.

Paul
pauliep
 
Posts: 4
Joined: Thu May 17, 2012 4:00 pm

Re: Not showing Remote Linc2 controller properly

Postby AdminWes » Thu May 17, 2012 4:21 pm

Hi Paul,

Currently MobiLinc HD does not display a collected group of buttons for the RemoteLinc. What you are referring to is the 8-button and 6-button INSTEON KeyPadLincs when paired with an ISY. Under this configuration, MobiLinc will show the KPLs for the 8 or 6 button KPL devices.

Currently the RemoteLinc buttons appear as 8 separate on/off devices. Since the RemoteLinc is a pure controller and cannot be controlled or has direct control over a load, we opted to not include a specialized interface for this device, but are open to changing that position based on user feedback.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Not showing Remote Linc2 controller properly

Postby pauliep » Sat May 19, 2012 9:55 am

Wes,

Thank you for the timely response. I truly appreciate it.

I personally would like to see a 6 or 8 button KPL displayed as a single KPL with the labels being placed upon them. I thought I saw this on the ad material and was wondering about it.

Again, thanks for the timely response.

Paul
pauliep
 
Posts: 4
Joined: Thu May 17, 2012 4:00 pm

Re: Not showing Remote Linc2 controller properly

Postby AdminWes » Sat May 19, 2012 10:43 am

Hi Paul, thanks for the feedback.

MobiLinc currently does display the 6 and 8 button KPLs as a single KPL interface. This does appear in screen shots available.

What it doesn't do is roll up the RemoteLinc buttons into a single RemoteLinc device to show you on the iPad.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Not showing Remote Linc2 controller properly

Postby andyf0 » Sun May 20, 2012 3:17 pm

Wes, I think for the RL2 it would be nice to have a single switch showing the buttons. Given the size of the switches on the iPad a RL2 with 8 buttons uses up nearly a full screen of real estate just for the one device. Remember though, you need to provide a 4 button On & Off and an 8 button image for a complete solution. I suppose you can use the regular switch for the single ON/OFF configuration.

Add my support for this.
Thanks
andyf0
 
Posts: 92
Joined: Mon Mar 07, 2011 12:55 pm

Re: Not showing Remote Linc2 controller properly

Postby AdminWes » Mon May 21, 2012 6:15 am

Thanks Andy.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Not showing Remote Linc2 controller properly

Postby jiuer7845 » Mon Oct 24, 2022 5:30 pm

jiuer7845
 
Posts: 156
Joined: Sun Jun 12, 2022 10:24 pm

Re: Not showing Remote Linc2 controller properly

Postby jiuer7845 » Mon Oct 24, 2022 6:53 pm

jiuer7845
 
Posts: 156
Joined: Sun Jun 12, 2022 10:24 pm


Return to MobiLinc Feedback and Comments

Who is online

Users browsing this forum: No registered users and 9 guests

cron