Linear GDO status

Post your MobiLinc comments and feedback here.

Linear GDO status

Postby rleidy » Wed Aug 03, 2016 9:33 am

I just installed HD and the dashboard is showing a status of "0" rather than "Closed" for my ZWave Linear GDO. ISY correctly shows it as Open or Closed. I've tried modifying the custom status values for ON and OFF to Open and Closed, but since the status is "0", I don't think the custom values are being applied. ISY reports the device as ZW002_1 Barrier. Running version 4.7 of Mobilinc HD.
rleidy
 
Posts: 11
Joined: Wed Aug 03, 2016 9:24 am

Re: Linear GDO status

Postby AdminWes » Thu Aug 04, 2016 7:42 am

Hi rleidy,

It's possible we haven't seen this Z-Wave device before and MobiLinc doesn't know what to do with it.

The fastest way to get this supported is if I can connect to your ISY to investigate it directly. If this works for you please send me your ISY's UUID if you use MobiLinc Connect or your external IP/Port/username/password to: support@mobilinc.com and I'll be happy to take a look.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Linear GDO status

Postby rleidy » Fri Aug 05, 2016 6:58 am

Would it help to post the rest details for the device?

Linear GD00Z-4 Z-Wave GDO

Code: Select all
<nodeInfo>
<node flag="128">
<address>ZW002_1</address>
<name>ZWave Linear GDO</name>
<family>4</family>
<parent type="3">61096</parent>
<type>4.64.7.0</type>
<enabled>true</enabled>
<deviceClass>0</deviceClass>
<wattage>0</wattage>
<dcPeriod>0</dcPeriod>
<pnode>ZW002_1</pnode>
<sgid>1</sgid>
<devtype>
<gen>4.64.7</gen>
<mfg>335.18244.13616</mfg>
<cat>184</cat>
</devtype>
<ELK_ID>E11</ELK_ID>
<property id="ST" value="0" formatted="Closed" uom="97"/>
</node>
<properties>
<property id="ST" value="0" formatted="Closed" uom="97"/>
</properties>
</nodeInfo>
rleidy
 
Posts: 11
Joined: Wed Aug 03, 2016 9:24 am

Re: Linear GDO status

Postby AdminWes » Fri Aug 05, 2016 7:20 am

Thanks, but I see two issues:

1. Why is "closed" listed twice as properties on the device?
2. What is the value of "opened" and why isn't that listed?

It appears that this device can't actually change to anything but closed.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Linear GDO status

Postby rleidy » Fri Aug 05, 2016 7:41 am

The indentation was lost during cut/paste, but one ST property is under the nodeinfo element. The node element has a single ST property.

I don't know much about rest, but when I list all of the nodes presented by the ISY, they all have a single ST property showing the current state. I don't see any listing all possible commands for the device.

ISY shows an Open and a Close button for the device:

ISY screenshot.png
ISY
ISY screenshot.png (19.52 KiB) Viewed 15018 times
rleidy
 
Posts: 11
Joined: Wed Aug 03, 2016 9:24 am

Re: Linear GDO status

Postby AdminWes » Sun Aug 07, 2016 7:25 pm

Thanks rleidy,

Can you also post the node dump when the device is opened? I need to see the ST change and see what it considers to be ON/Opened.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Linear GDO status

Postby rleidy » Mon Aug 08, 2016 5:15 am

Hi Wes,
I'll try to get that for you later today. If memory serves, the device in MobiLinc shows 0 for closed, 100 for open, 103 for opening, and 104 for closing. I did find that I could not operate the GDO via ML. ML would only reflect the current status.
rleidy
 
Posts: 11
Joined: Wed Aug 03, 2016 9:24 am

Re: Linear GDO status

Postby AdminWes » Mon Aug 08, 2016 7:21 am

Thanks rleidy,

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Linear GDO status

Postby rleidy » Mon Aug 08, 2016 2:50 pm

Wes,
Here's the dump of the rest data when the GDO is open.

Ross

Code: Select all
<nodeInfo>
<node flag="128">
<address>ZW002_1</address>
<name>ZWave Linear GDO</name>
<family>4</family>
<parent type="3">61096</parent>
<type>4.64.7.0</type>
<enabled>true</enabled>
<deviceClass>0</deviceClass>
<wattage>0</wattage>
<dcPeriod>0</dcPeriod>
<pnode>ZW002_1</pnode>
<sgid>1</sgid>
<devtype>
<gen>4.64.7</gen>
<mfg>335.18244.13616</mfg>
<cat>184</cat>
</devtype>
<ELK_ID>E11</ELK_ID>
<property id="ST" value="100" formatted="Open" uom="97"/>
</node>
<properties>
<property id="ST" value="100" formatted="Open" uom="97"/>
</properties>
</nodeInfo>
rleidy
 
Posts: 11
Joined: Wed Aug 03, 2016 9:24 am

Re: Linear GDO status

Postby AdminWes » Tue Aug 09, 2016 7:26 am

Thanks. I'll add it to my list to investigate.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Next

Return to MobiLinc Feedback and Comments

Who is online

Users browsing this forum: No registered users and 1 guest