MorningLinc

Submit feedback, comments, and support help here.

MorningLinc

Postby ssingh1234 » Mon May 23, 2011 7:47 pm

Hi there, I am trying to add a morninglinc RF module that can control my morning industry door lock. But, there is no option in devices for a morninglinc module. I have tried pretty much all the devices listed within Mobilinc HD with no luck.

pls advise - thank you!
ssingh1234
 
Posts: 19
Joined: Mon May 23, 2011 7:44 pm

Re: MorningLinc

Postby AdminWes » Tue May 24, 2011 7:37 am

Hi ssingh1234,

The MorningLinc is slightly different than most INSTEON devices. Most devices will accept commands from any controller that knows its INSTEON ID. In the case of the MorningLinc you need to manually link the MorningLinc to your SmartLinc first by going through the button press and hold technique to link the MorningLinc to the SmartLinc. Once linked, try adding the MorningLinc to MobiLinc as a SwitchLinc and attempt to command it ON and OFF.

I will attempt this here in our test lab as well, to confirm.

Wes
AdminWes
Site Admin
 
Posts: 2096
Joined: Sat Feb 07, 2009 2:52 pm

Re: MorningLinc

Postby ssingh1234 » Tue May 24, 2011 8:11 pm

ok thanks - I got it going. I didn't have the morninglic working with the smart controller properly as you had stated.

It would be nice if in MobiLinc you would have a way to add graphics as well. It would help if there was a way to easily distinguish with all the switches.
ssingh1234
 
Posts: 19
Joined: Mon May 23, 2011 7:44 pm

Re: MorningLinc

Postby AdminWes » Wed May 25, 2011 6:14 am

Great! Glad to hear it's working for you.

Thanks for the feedback on adding graphics on switches. We have a few features planned in the area that hopefully will address this.

Wes
AdminWes
Site Admin
 
Posts: 2096
Joined: Sat Feb 07, 2009 2:52 pm


Return to MobiLinc Feedback and Comments

Who is online

Users browsing this forum: No registered users and 1 guest

cron