Minimum 2414U (internal) firmware requirements for iLinc?

Post your MobiLinc comments and feedback here.

Minimum 2414U (internal) firmware requirements for iLinc?

Postby ilincandy » Sat Feb 28, 2009 5:57 pm

What is the minimum firmware requirement for iLinc?
Note: I have on my Insteon Controller PowerLinc V2 USB #2414U using the Smarthome Device Manager command "getFirmware" and it shows firmware version 2.13.
The physical markings on the outside of the controller module shows REV 2.0. :geek: :geek: :geek:
ilincandy
 
Posts: 18
Joined: Sat Feb 28, 2009 5:43 pm

Re: Minimum 2414U (internal) firmware requirements for iLinc?

Postby AdminWes » Sat Feb 28, 2009 7:40 pm

I took a look at my PowerLinc and I have the same firmware (2.13) installed. The REV version marked on my USB unit shows 2.1.

If you are hesitant to try iLinc, I'm expecting to have iLinc Lite (Free version, supports one device and one scene for configuration testing) approved next week.
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Minimum 2414U (internal) firmware requirements for iLinc?

Postby ilincandy » Sat Feb 28, 2009 7:49 pm

Somewhere I read that the Device Manager 308 needs 2.8 or better?

Link: http://www.insteon.net/sdk/files/dm/docs/
Note: This copy of the Smarthome Device Manager is probably not up to date but in it says
Quote: "PowerLinc Controller Firmware Requirement: 2.8 or better"
Last edited by ilincandy on Sat Feb 28, 2009 8:03 pm, edited 1 time in total.
ilincandy
 
Posts: 18
Joined: Sat Feb 28, 2009 5:43 pm

Re: Minimum 2414U (internal) firmware requirements for iLinc?

Postby AdminWes » Sat Feb 28, 2009 8:03 pm

I haven't heard about a 2.8 Rev. I've had my PowerLinc for a few years so I could be a bit behind.

I can tell you that I'm running SDM 308 on my XP machine with PowerLinc Rev 2.1 (2.13 Firmware) and eveything works great.
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Minimum 2414U (internal) firmware requirements for iLinc?

Postby ilincandy » Sat Feb 28, 2009 8:06 pm

What you have is exactly what I have eg SDM 308 with firmware 2.13 :D :D :D

I would like to add that Insteon firmware version 2.13 (PowerLinc V2 USB model #2414U) is the latest firmware version from Smarthome in the last several years per SH.
ilincandy
 
Posts: 18
Joined: Sat Feb 28, 2009 5:43 pm


Return to MobiLinc Feedback and Comments

Who is online

Users browsing this forum: No registered users and 3 guests