Status with X10
Posted: Mon Nov 23, 2009 3:58 pmHow do i see if my lights are on or off (status) is it possible. I am using the 2414u and all x10 dimmer switches
Hi playaz32,
The SDM software doesnot allow iLinc to get at the X10 status. I believe the main reason is that most X10 devices do not broadcast or send their status on query. Some of the newer X10 devices will give their status if queried in the Extended X10 code range, but to my working knowledge of the SDM interface there isn't a way to have the SDM software query an X10 device for status. As such, iLinc can only command an X10 device to on/off/dim.
Wes