Hey,
Thanks for helping me figure this out.
-I have tried house codes B and M, but have not tried A. I think Ill try that next.
-Yes, All the X10 Module I have are X10 Compatable. I Am mostly using X10 Dimmer Light Switches though.
-The model number for the module is RadioShack Plug 'n power Lamp Module Cat. No. 61-2682B. The Model Number for the switch is a Smarthome Smartlinc 2384. Also, I have Dimming Fixture modules on my front lights that are x10 that I would also like to control. Thier model numbers are RD110. The link to that is here:
http://www.smarthome.com/2251AC/HomePro ... ule/p.aspx-The response from SDM was: "PLC:ResponseB2:sendx10=True,B2,AON" and again, nothing happened.
Thanks,
Will