HELP! cant control from ilinc

Post your MobiLinc comments and feedback here.

HELP! cant control from ilinc

Postby willell » Sat Mar 14, 2009 4:31 pm

when i use the smarthome timer software, I can control x10 lights fine, but from ilinc, the commands show up in SDM but nothing happens.


Update: I tied with insteon addresses and they worked, so i know that it is communicating with the computer, just not x10 codes.
willell
 
Posts: 4
Joined: Sat Mar 14, 2009 4:15 pm

Re: HELP! cant control from ilinc

Postby AdminWes » Sat Mar 14, 2009 10:24 pm

Let's see if we can figure out what's going on.

A couple of questions...

- What house code are you using?
- iLinc was tested with X10 modules that are on/off only. Is the X10 module(s) you are trying to communicate to dimmer capable?
- What is the model number of the X10 module?
- When using iLinc to control the X10 device that is unresponse, what is SDM reporting as the command and the response?
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: HELP! cant control from ilinc

Postby willell » Sun Mar 15, 2009 10:30 am

Hey,

Thanks for helping me figure this out.

-I have tried house codes B and M, but have not tried A. I think Ill try that next.
-Yes, All the X10 Module I have are X10 Compatable. I Am mostly using X10 Dimmer Light Switches though.
-The model number for the module is RadioShack Plug 'n power Lamp Module Cat. No. 61-2682B. The Model Number for the switch is a Smarthome Smartlinc 2384. Also, I have Dimming Fixture modules on my front lights that are x10 that I would also like to control. Thier model numbers are RD110. The link to that is here: http://www.smarthome.com/2251AC/HomePro ... ule/p.aspx
-The response from SDM was: "PLC:ResponseB2:sendx10=True,B2,AON" and again, nothing happened.


Thanks,
Will
willell
 
Posts: 4
Joined: Sat Mar 14, 2009 4:15 pm

Re: HELP! cant control from ilinc

Postby willell » Sun Mar 15, 2009 11:48 am

Update: I tried using house code A with A1 and it worked like charm, even on a dimmer module, but ilinc only supports on/off.
willell
 
Posts: 4
Joined: Sat Mar 14, 2009 4:15 pm

Re: HELP! cant control from ilinc

Postby AdminWes » Sun Mar 15, 2009 12:11 pm

Thanks for the update. With your last post I think I found the problem. I'm working on a fix and will post back when it's been released to the app store.

Thanks for posting the problem!
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: HELP! cant control from ilinc

Postby AdminWes » Tue Mar 17, 2009 8:08 pm

Update:

I've fixed the X10 House code problem and have submitted it to the App Store for approval tonight. Thanks to willell for finding this.

Version 1.1 is on the way!
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: HELP! cant control from ilinc

Postby jiuer7845 » Mon Oct 24, 2022 5:55 pm

jiuer7845
 
Posts: 156
Joined: Sun Jun 12, 2022 10:24 pm

Re: HELP! cant control from ilinc

Postby jiuer7845 » Mon Oct 24, 2022 7:23 pm

jiuer7845
 
Posts: 156
Joined: Sun Jun 12, 2022 10:24 pm


Return to MobiLinc Feedback and Comments

Who is online

Users browsing this forum: No registered users and 2 guests