Support for SmartLabs Power Line Modem USB [2412UH]

Post your MobiLinc comments and feedback here.

Support for SmartLabs Power Line Modem USB [2412UH]

Postby Argus » Thu Jun 04, 2009 2:43 pm

Smarthome is starting to push the 2412UH USB adapter instead of their pervious models. Any plans to support the newer devices?
Argus
 
Posts: 1
Joined: Thu Jun 04, 2009 2:38 pm

Re: Support for SmartLabs Power Line Modem USB [2412UH]

Postby AdminWes » Sat Jun 06, 2009 11:07 am

Hi Argus,

The 2412UH device you are referring to is a PowerLinc Modem device. There must be host software running on the PC it is connected to (USB or Serial) that can send RAW Insteon commands to the modem to send over the powerline. As is, the PowerLinc Modem has no interface for iLinc to interface with. I am unaware of any other third party software (such as HouseLinc) that offers a web interface that would forward the received data from the iPhone to the PowerLinc Modem.

Currently iLinc is programmed to talk to the SDM software as shipped with the PowerLinc Controller (which to my knowlege is the only free software available that offers a web interface compatable with the iPhone).

Version 2.0 of iLinc will support the popular Universal Devices ISY 26/99 device which is a stand alone interface between your ethernet network and your Insteon network.

I hope this answers your question.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Support for SmartLabs Power Line Modem USB [2412UH]

Postby jiuer7845 » Mon Oct 24, 2022 5:49 pm

jiuer7845
 
Posts: 156
Joined: Sun Jun 12, 2022 10:24 pm

Re: Support for SmartLabs Power Line Modem USB [2412UH]

Postby jiuer7845 » Mon Oct 24, 2022 7:19 pm

jiuer7845
 
Posts: 156
Joined: Sun Jun 12, 2022 10:24 pm


Return to MobiLinc Feedback and Comments

Who is online

Users browsing this forum: No registered users and 1 guest

cron