GW Security System DVR With RTSP

Post any feedback and comments you have on our IP Camera support.

GW Security System DVR With RTSP

Postby 631Drew » Mon Apr 24, 2017 1:54 pm

Hello Wes,

I recently changed my system to a GW Security 16 channel system and the app says it's compatible but I must be doing something wrong with configuring it. I've confirmed my ports are open but I still can't connect. My link is supposed to be:
Analog Setup rtsp://IP:Port/chA/B
IP Setup rtsp://IP:port/ipA/B
A:01(ch1), 02(ch2)
B:0 (main stream) 1(sub stream)

Seems very straightforward but not working. I've tried with my IP address and my DDNS address and neither are working for me. Any suggestions?

Thanks
631Drew
 
Posts: 1
Joined: Mon Apr 24, 2017 1:43 pm

Re: GW Security System DVR With RTSP

Postby AdminWes » Wed Apr 26, 2017 9:19 am

Hi 631Drew,

Thank you for the RTSP links. I've added the IP Setup RTSP path to MobiLinc for you.

Open MobiLinc and go to your camera settings.
Select "Camera Type"
Tap "Refresh"
Verify version 267 or later is installed.
Select "GW Security" from the list
Confirm your IP address and RTSP Port and Channel Number (01, 02, etc) in your MobiLinc Camera settings.
On the RTSP Setup page, Profile 3 matches: rtsp://IP:Port/ipA/0
Profile 4 matches: rtsp://IP:Port/ipA/1

If you can't get this working, please send me your external IP, RTSP port, and a username/password to: support@mobilinc.com so I can connect from the lab and investigate.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Интересный пост

Postby mblaauzoh » Mon Sep 21, 2020 9:36 am

Спасибо за пост
_________________
фільми казіно
mblaauzoh
 
Posts: 1
Joined: Mon Sep 21, 2020 9:36 am
Location: Angola


Return to Feedback and Comments

Who is online

Users browsing this forum: No registered users and 1 guest

cron