Mobilinc Pro v3.10.00

Post any feedback and comments you have on our IP Camera support.

Mobilinc Pro v3.10.00

Postby Goblin » Sun Sep 23, 2012 1:55 pm

Hi Wes,

Still doesn't support Foscam 8608W :( I can easily watch rstp stream with VLC at
rtsp://ip_addr:554/11, tried all profiles in Mobilinc, but can't get a stream :(
Changed RTSP ports, nothing :(
Latest camera firmware, Mobilinc camera database v48 (8/29/2012).
Even re-installed Mobilinc :(

Thank you,
Sergey
Goblin
 
Posts: 23
Joined: Wed Aug 08, 2012 10:47 am

Re: Mobilinc Pro v3.10.00

Postby AdminWes » Sun Sep 23, 2012 2:42 pm

HI Sergey,

Would you mind if I connect to your camera to see what may be happening? If VLC works, our MobiLinc code should work. I would like to diagnose the connection stream from the lab.

If you are ok with this, would you please send your connection info to support@mobilinc.com and we'll take it from there.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Mobilinc Pro v3.10.00

Postby Goblin » Sun Sep 23, 2012 3:04 pm

You will need admin credentials, right?
Goblin
 
Posts: 23
Joined: Wed Aug 08, 2012 10:47 am

Re: Mobilinc Pro v3.10.00

Postby Goblin » Sun Sep 23, 2012 3:35 pm

Sent
Goblin
 
Posts: 23
Joined: Wed Aug 08, 2012 10:47 am

Re: Mobilinc Pro v3.10.00

Postby Jdmoser » Sat Sep 29, 2012 11:52 am

I am in similar situation. I can bring up my foscam 9820 on VLC and through the safari browser with quicktime on my Mac but can not get past profile message on my iPhone or iPad using Mobilinc HD and ip camera plug in..Version 3.10.00. I have set the rtsp port to 554. I have no problems with Foscam 8910 cameras with Mobilinc. I can bring up the foscam 9820 on live cams pro 2.2 mobile app. Any thoughts?

J David Moser
Jdmoser
 
Posts: 2
Joined: Sun Jul 22, 2012 6:37 pm

Re: Mobilinc Pro v3.10.00

Postby AdminWes » Sat Sep 29, 2012 2:30 pm

Hi JDMoser,

I've been working with Sergey and think we have a solution. FOSCAM changed their API interface with this camera to where none of the previous known profiles lined up with their new API.

Good news/partial bad news: The good news is that JPEG images are working now. You can get the updated profile now by doing this:

- Launch MobiLinc
- Go to My Settings->IP Camera Settings->Select your Camera->Camera Type
- Tap the "Refresh" button in the upper-right corner.
- Confirm that version 53 or greater was downloaded and installed.
- Pick Foscam from the list of cameras. {Important step!}
- Go back and confirm your camera settings.
- Tap Next to see if JPEG profile 2 will get an image from your camera.

The partial bad news is the you'll have to wait for RTSP support for the next MobiLinc release. We had to make a couple of changes to the code to accept this FOSCAM's RTSP feed. But, it works and will be in the next release.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Mobilinc Pro v3.10.00

Postby Jdmoser » Sat Sep 29, 2012 6:27 pm

Thanks, jpeg works for view. Looking forward to next update.
Jdmoser
Jdmoser
 
Posts: 2
Joined: Sun Jul 22, 2012 6:37 pm

Re: Mobilinc Pro v3.10.00

Postby AdminWes » Sun Sep 30, 2012 2:24 pm

Excellent, thanks.
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm


Return to Feedback and Comments

Who is online

Users browsing this forum: No registered users and 10 guests

cron