Mobile Integrated Solutions

Guys I have installed a smarthome camera and can view the camera through the IP address. I have also purchased the camera add-in for my mobilinc. However when I try to add the camera it cannot connect.

I've put in the following info:

Name - Camera1
CameraType - Smarthome
IP 192.168.1.120
Port 21 (I'm not sure if this is correct) Can you please help me figure out the correct port #
User name and password is the default
HTTPS is Off
Refresh is 2

Any help is appreciated

I got it to work via my wifi (port was 80). However over 3G it does not work....suggestions? The rest of my insteon network does work over 3G using the Mobilinc App

Hi there,

Yes, the default port is port 80.

To access your camera outside of your network, please see this post:
http://forum.mobilinc.com/viewtopic.php?f=55&t=2423&sid=65512a19d6fb7eefed56c0abda24f583

Wes