Q-See

Post any feedback and comments you have on our IP Camera support.

Q-See

Postby meangene » Thu Aug 27, 2015 4:54 pm

Do you support the Q-See QT 5680 DVR
I can view my cams from the QT iPhone app and even view them remotely from work.
I am running the latest firmware on the DVR but can't seem to make a connection.
the DVR is about 3 years old, does it have to use RTSP to make the connection.
meangene
 
Posts: 2
Joined: Thu Aug 27, 2015 4:44 pm

Re: Q-See

Postby AdminWes » Fri Aug 28, 2015 7:15 am

Hi meangene,

For MobiLinc support, the DVR or camera needs to support a JPEG, MJPEG, or RTSP connection. Check the settings of the DVR through it's native web interface and see if you can find an RTSP setting. What we'd need in order to support the DVR is the full RTSP path to each camera managed by the DVR. This looks something like:

rtsp://ip-address/channels/1

Most of the Q-See products use a "Multimedia" port which isn't supported by MobiLinc.

Wes
AdminWes
Site Admin
 
Posts: 2039
Joined: Sat Feb 07, 2009 2:52 pm

Re: Q-See

Postby meangene » Fri Aug 28, 2015 3:48 pm

Any chance of a future upgrade that will support Multimedia?
meangene
 
Posts: 2
Joined: Thu Aug 27, 2015 4:44 pm

Re: Q-See

Postby AdminWes » Fri Aug 28, 2015 5:06 pm

Hi meangene,

Unlikely. The problem with "Multimedia" is that it's vendor specific and not any one standard like RTSP.

Wes
AdminWes
Site Admin
 
Posts: 2039
Joined: Sat Feb 07, 2009 2:52 pm


Return to Feedback and Comments

Who is online

Users browsing this forum: No registered users and 1 guest