Page 1 of 1

Q-See

PostPosted: Thu Aug 27, 2015 4:54 pm
by meangene
Do you support the Q-See QT 5680 DVR
I can view my cams from the QT iPhone app and even view them remotely from work.
I am running the latest firmware on the DVR but can't seem to make a connection.
the DVR is about 3 years old, does it have to use RTSP to make the connection.

Re: Q-See

PostPosted: Fri Aug 28, 2015 7:15 am
by AdminWes
Hi meangene,

For MobiLinc support, the DVR or camera needs to support a JPEG, MJPEG, or RTSP connection. Check the settings of the DVR through it's native web interface and see if you can find an RTSP setting. What we'd need in order to support the DVR is the full RTSP path to each camera managed by the DVR. This looks something like:

rtsp://ip-address/channels/1

Most of the Q-See products use a "Multimedia" port which isn't supported by MobiLinc.

Wes

Re: Q-See

PostPosted: Fri Aug 28, 2015 3:48 pm
by meangene
Any chance of a future upgrade that will support Multimedia?

Re: Q-See

PostPosted: Fri Aug 28, 2015 5:06 pm
by AdminWes
Hi meangene,

Unlikely. The problem with "Multimedia" is that it's vendor specific and not any one standard like RTSP.

Wes