Page 1 of 1

HooToo HT-HS03 Camera Problems

PostPosted: Tue May 10, 2016 5:51 pm
by drummonkey
Anyone having any luck getting this camera to work in mobilinc pro with the ip camera plugin installed?

Re: HooToo HT-HS03 Camera Problems

PostPosted: Wed May 11, 2016 6:16 pm
by AdminWes
Hi drummonkey,

Do you have the RTSP address for this camera? It looks like: rtsp://ip-address/streaming/1 or similar. Usually it's listed in the manual or via the configuration software.

If you can post the RTSP address of your camera, I can get it added to MobiLinc for you.

Wes

Re: HooToo HT-HS03 Camera Problems

PostPosted: Thu May 12, 2016 9:36 am
by drummonkey
Well, that's the problem with this camera. The manual has no information at all except to say download the app. The software (E-Hawk app) only shows ip address. No port, no rtsp, etc.

Re: HooToo HT-HS03 Camera Problems

PostPosted: Fri May 13, 2016 7:58 am
by AdminWes
If you have external access setup for the camera, and you'd like me to take a look at it, please send me the following:

- External IP
- Port and RTSP Port (if known)
- username/password

If I can connect from the lab there's a good chance I can determine what streaming method and path it's using and get that added to MobiLinc for you.

Please send to: support@mobilinc.com and reference this post.

Wes