Page 1 of 1

RTSP video feed with Ubiquiti IP Camera

PostPosted: Thu Nov 10, 2016 12:22 pm
by GMD999
I have Mobilinc Pro and I am trying to connect a local Ubiquiti IP camera to view an RTSP feed.

Within the Ubiquiti configuration I am shown rtsp://10.0.1.132:554/s0 as the RTSP URL. I have tried setting up the camera with the RTSP port as 554 and the local http:// address as 10.0.1.132. I have no idea on how to set up the '/s0' part. I have also entered the user name and password.

When I go into the Mobilinc IP Camera Setup for the RTSP feed I have tried using the 2 profiles available but neither profile does anything!

Any thoughts on how I fix this?

Thanks

Re: RTSP video feed with Ubiquiti IP Camera

PostPosted: Thu Nov 10, 2016 3:21 pm
by AdminWes
Hi GMD999,

Thank you for the full RTSP path. I've updated the MobiLinc driver DB with the /s0 path.

Open MobiLinc and go to your camera's settings.
Tap "Camera Type"
Tap "Refresh" to download version 242 or later.
Tap "Ubiquiti" to set the new camera type.
RTSP Profile 3 matches /s0

Please let me know if this works for you. If not, please contact us at support@mobilinc.com with your external IP, port, RTSP port, and a username/password I can use from the lab to connect and investigate.

Wes

Re: RTSP video feed with Ubiquiti IP Camera

PostPosted: Fri Nov 11, 2016 2:08 pm
by GMD999
Hi Wes,

No this didn't work!

I sent you an email at support@mobilinc.com with more details.

Thanks,

Gary

Re: RTSP video feed with Ubiquiti IP Camera

PostPosted: Sun Nov 13, 2016 12:02 pm
by AdminWes
Hi Gary,

I received both of your emails. I've put my investigation on hold until you confirm that your camera is back up and running. I was able to connect once to get it streaming, but after that initial connection, the camera would no longer respond.

Wes