Page 1 of 1

Ubiquiti Unifi Video and Mobilinc HD rtsp stream

PostPosted: Fri Jan 25, 2019 3:47 pm
by radiotech655
Hello,

I have the following url for the rtsp stream out of the Ubiquiti UniFi Video NVR. I have tried, unsuccessfully, to integrate into the Mobilinc HD app. Can you please instruct me precisely what goes into which field?

rtsp://192.168.170.167:7447/5b60d127d804bb42fad165ef_0

I have tried to input rtsp://192.168.170.167 into the local IP field, 7447/5b60d127d804bb42fad165ef_0 into the rtsp field, without success.

Re: Ubiquiti Unifi Video and Mobilinc HD rtsp stream

PostPosted: Sat Jan 26, 2019 8:31 am
by AdminWes
Hi radiotech655,

Try this:

IP: 192.168.170.167
RTSP Port: 7447
RTSP Path: /5b60d127d804bb42fad165ef_0

Wes

Re: Ubiquiti Unifi Video and Mobilinc HD rtsp stream

PostPosted: Sat Jan 26, 2019 12:03 pm
by radiotech655
Wes,

I don't see a field for the path... the fields are local http, local port, rtsp port. I have the Camera Type set to Ubiquiti. If I select Custom, I see a field for rtsp address.

To make sure the stream is present, I tested the link in VLC, it worked...

Thoughts?

Re: Ubiquiti Unifi Video and Mobilinc HD rtsp stream

PostPosted: Mon Jan 28, 2019 7:48 am
by AdminWes
Hi radiotech655,

Yes, select "Custom" so you can enter in the custom RTSP path for your camera.

Wes

Re: Ubiquiti Unifi Video and Mobilinc HD rtsp stream

PostPosted: Mon Jan 28, 2019 11:33 am
by radiotech655
That worked! Thanks

Re: Ubiquiti Unifi Video and Mobilinc HD rtsp stream

PostPosted: Mon Jan 28, 2019 1:11 pm
by AdminWes
Great! Glad to hear it!

Wes

Re: Ubiquiti Unifi Video and Mobilinc HD rtsp stream

PostPosted: Tue Apr 23, 2019 7:01 pm
by mobi
Perhaps posted in wrong place on related thread, but if you want the RTSP and JPEG approach for the NVR, I outlined it at end of thread here:
viewtopic.php?f=57&t=2944

Maybe AdminWes can help me understand why the JPEG retrieval works successfully in the camera setup, but doesn't actually display in the dashboard view. I'm assuming that's what it's trying to show when in the multi-cam view of the app. Click on the camera gets me the video feed, but back where I view multiple cameras at once, it's just the spinning wheel and black square, intermittently saying it's trying to reconnect.

UPDATE: I read the thread here: viewtopic.php?f=56&t=2918 and it mentions a need to explicitly state "Do Not Use" on the non-RTSP profiles. However, this doesn't seem to be an option when doing a "custom IP camera" for camera type in the iOS app, it doesn't seem to disable the profiles like it would in a pre-set camera type. For instance, when in camera setup and it tries the JPEG profile, I say "Pick another Profile"/"Do Not Use", and it just retrieves the image again and asks if I want to move on. Similarly with MJPEG. I've tried clearing out the paths for jpeg and mjpeg and it has similar behavior, just giving an error during those profile setup steps, but not changing even if I specify to not use. Any ideas?