by AdminWes » Sat Jul 05, 2014 4:26 pm
Hi tlarrain,
Just to clarify, only the powerline feature of INSTEON with the PLM will not work on 50Hz, however, the dual-band RF segment will since this is independant of power frequency. Once the signal from the PLM goes RF, this will transmit to all other 915MHz RF INSTEON devices within range and repeat through the home on RF and 50Hz courtesy of the newer INSTEON 50/60Hz dual-band devices like the SwitchLinc.
You'd need to check with each RF capable device to see which frequency it's RF is transmitting on, but the new Dual-Band SwitchLinc products are 50/60 Hz compatible and transmit on the same RF frequency as the PLM (915MHz).
Wes