by jaherrerab » Sat May 10, 2014 9:05 am
On all devices, I did it (what you suggested) , but it neither works.
Searching beyond, a possible diagnosis will be that from the dashboard ( in Mobilinc pro or HD), devices that aren´t controllers for others (through scenes) work fine, the others don't work.
In the above data, the bath room, the lobby and the living room have the following configuration:
1.Bath ( BanoAuxiliar ) is controller for controlCocina.B (in ControlEntradaBBanoAuxiliar scene) .
2.Lobby ( Entrada.shadow ) is controller for ControlCocina.C (in controlEntradaCCocina scene).
3.Livingroom ( SalaComedor ) is controller for ControlCocina.D (in ControlEntradaDSalaComedor scene).
(Since these devices are turn on from themselves or from a remote keypad button,
these scenes turn on the buttons on the remote keypad when the devices are turned on from themselves.)
Instead, the kitchen presents this one:
Kitchen ( ControlCocina.1 ) isn´t the controller for a device in any scene.
I insist that if I turn on or turn off the devices mentioned in "Devices" everything works fine. Also, in Mobilinc HD using the diagram of the dimmer, it does not work, but when entering the settings of the device and turn it on or off, it works well. Please see image.
The current configuration is:
1. ISY 99i pro with firmware 3.3.10 .
2. Several iOS devices as controllers running Mobilinc Pro
3. A IOS device running mobilinc HD .
What do you think? thanks a lot!
- Attachments
-
- photo4.png (195.67 KiB) Viewed 7575 times