I have a fanlinc hooked up to the ISY.
Currently - I have 4 scenes as follows:
- Code: Select all
'Family Fan - Off'
Fanlinc - Off (responder)
KPL6 - Family - C - On (Responder / Controller)
KPL6 - Family - D - Off (Responder)
KPL6 - Family - E - Off (Responder)
KPL6 - Family - F - Off (Responder)
'Family Fan - Low'
Fanlinc - Low (responder)
KPL6 - Family - C - Off (Responder)
KPL6 - Family - D - On (Responder / Controller)
KPL6 - Family - E - Off (Responder)
KPL6 - Family - F - Off (Responder)
'Family Fan - Medium'
Fanlinc - Medium (responder)
KPL6 - Family - C - Off (Responder)
KPL6 - Family - D - Off (Responder)
KPL6 - Family - E - On (Responder / Controller)
KPL6 - Family - F - Off (Responder)
'Family Fan - High'
Fanlinc - High (responder)
KPL6 - Family - C - Off (Responder)
KPL6 - Family - D - Off (Responder)
KPL6 - Family - E - Off (Responder)
KPL6 - Family - F - On (Responder / Controller)
This appears to work very well in the house. All KPL lights stay in sync with the fan status - and I can switch 'ON' any scene to cause all lights to change on the KPL at the same time the fan starts at the desired setting. (I even have IFTTT able to turn the fan to any setting via my CAO gadgets 'Kumoapps' account - and the KPL lights show correct status). This is the 'ISY' recommended way (according to the GUI) of doing KPL button grouping. They do NOT recommend grouping buttons on the KPL itself. I do not know why...
Now - the problem exists in Mobilinc in the way it interpolates the scene status for these scenes (something that ISY does not do for exactly this kind of reason).
When the fan is 'Off' - Mobilinc reports the 'Family Fan - Off' scene as 'Off' - but the other three scenes as 25% (which is bogus! - It's seeing the KPL6 - C button as one of 4 'responders' within the scene as 'ON' - and assuming 25% for the scene overall - an incorrect assumption).
How do I tell Mobilinc that the ONLY scene device to look at for status is the fanlinc itself - not the 'responder-only' KPL buttons?
I primarily use Android mobilinc - but I've also verified this on an iPad using Mobilinc HD. Same issue on both.
Thanks!
Michael.