Hello,
I have a few scenes set up on the MobiLinc Dashboard, where I want to be able to always send an "ON" or "OFF" command from the Dashboard icon regardless of the current state of the scene. For example,
1. An All Off button for a room: regardless of the current status (devices on, off, partial scene %, etc.) whenever this icon is pressed, it should send an "OFF". This button should never be able to send an ON.
- I have removed Custom Command Names for all functions except OFF, the problem is many times MobiLinc will show the "All Off" scene as OFF even when some. This results in MobiLinc not sending any command when I press the icon. Interestingly, when I tap the gear icon, the Device List is correct (showing a few devices on).
2. A TV scene button for a room: again, regardless of devices status this button should always send an ON command; it should never be able to send an OFF.
- Again, I have removed all Custom Command Names except for ON. The problem here is that if some devices are on, MobiLinc will show the scene status as, say "75%" such that tapping the icon will result in no command being sent (when it should send an ON command).
Any thoughts in how I can fix this?
Thanks.