by joenicorata » Fri Sep 25, 2015 6:11 pm
Wes
This is my first post. I have been using/selling mobilinc for the last few months and it is great.
I also had this issue. I didn't even realize that "Tap the sensor to activate the relay" was even a feature until I stumbled across it in the version history on my iPhone today
I removed my sensor from the scene it was controlling to correct the problem of this thread, but was left with an issue. The sensor was controlling a scene where 3 keypad buttons throughout the home lit up when the door was opened. The same buttons were also controllers for a scene which operated the relay. Once the sensor was removed from the status scene, the keypads wouldn't properly indicate the status of the door.
I fixed this with a program on the isy that sends a scene on command to the status scene (containing keypad buttons) when the sensor is opened. This seems to be working well.
Do you have any other suggestions for accomplishing this or I am I going about this correctly? The only downside I have seen to this method so far is a 1.0 second delay from the time the door starts to open to the scene activating. It was instant before. This isn't a big deal, I just wanted to point it out
Thanks for all of your hard work, and thanks for fixing the over-complicated garage door issue. Much better now!
Joe