Samsung SmartCam Support

Does MobiLinc report a string a numbers (x.x.x.x) for a device you own? Report it here!

Samsung SmartCam Support

Postby Baja » Mon Aug 07, 2017 9:13 am

Is there any way to add a Samsung SmartCam to MobiLinc? I don't see any way to configure DDNS on the SmartCam so I don't see how it would be possible, but maybe I'm missing something. Thanks.
Baja
 
Posts: 8
Joined: Wed May 01, 2013 2:46 pm

Re: Samsung SmartCam Support

Postby AdminWes » Tue Aug 08, 2017 6:34 am

Hi Baja,

If this camera supports RTSP make sure to enter in the RTSP port in MobiLinc (default is 554) as well as the camera's username/password (not your camera's cloud account credentials) and the IP address of the camera.

On the RTSP setup page, RTSP Profiles 3, 4, 5, and 7 line up with known profiles from recent Samsung cameras.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Samsung SmartCam Support

Postby Baja » Thu Aug 10, 2017 12:09 pm

Wes,

Thanks for your help. I was able to get it working on an iPad mini 2 and an iPhone 7 (both running iOS version 10.3.3). However, I have an older iPad 2 running iOS version 9.3.5. that I can't get to work. Would the configuration be different for an older version of iOS? Thanks.
Baja
 
Posts: 8
Joined: Wed May 01, 2013 2:46 pm

Re: Samsung SmartCam Support

Postby AdminWes » Thu Aug 10, 2017 3:56 pm

Hi Baja,

What version of MobiLinc is the iPad 2 running? Is it the same version as your other iOS devices?

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Samsung SmartCam Support

Postby Baja » Thu Aug 10, 2017 4:54 pm

Yes, all three iOS devices are running the same version of MobiLinc, v4.12.
Baja
 
Posts: 8
Joined: Wed May 01, 2013 2:46 pm

Re: Samsung SmartCam Support

Postby AdminWes » Fri Aug 11, 2017 6:34 am

Hi Baja,

The iPad 2 is borderline capable of streaming RTSP especially if the video is 720p or higher. What we see with the old iPad 2 is that it's CPU can't keep up with high bandwidth stream or high resolution streams. That may be the issue you are seeing.

Do you have more than one camera? If so, only try one camera to see if you can get the iPad to connect to just one camera during setup. Or use the "copy" feature to copy settings from the working iOS device to the iPad 2. Single camera view should then work for you depending on the bandwidth/resolution that the camera is sending.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm


Return to Device Support in MobiLinc

Who is online

Users browsing this forum: No registered users and 1 guest

cron