by AdminWes » Sun Feb 20, 2011 2:06 pm
Hi Peter,
What seems to be the problem? Since you've posted under the PowerLinc, I'm assuming you are attempting to setup MobiLinc HD for the PowerLinc controller. The PowerLinc requires a few more manual steps than the SmartLinc or ISY as these act more like servers and can provide this info automaticially to MobiLinc HD.
To setup MobiLinc HD for the PowerLinc please follow these instructions:
1. Tap the settings icon (wrench) in the lower-right corner.
2. Tap "Lighting Controller"
3. Change the Host type to the PowerLinc 2414.
4. Enter you username and password (or leave blank if these wasn't setup in your SDM software).
5. Enter the IP address of the PC hosting SDM for the PowerLinc.
6. Enter the port (9020) or different port if you changed it in SDM.
7. Tap My Devices (the icon that looks like a keypad).
8. Tap "Add Device" at the top-right of the screen.
9. Enter in each of your INSTEON and X10 devices here. Repeat for each device.
10. Tap on My Scenes (the icon that looks like a film role).
11. Tap on "Add Scene" to create a new scene.
12. To add devices to a scene, tap on the gear icon for that scene and tap "Edit" in the upper right corner.
13. Select all the device and the ON level for that device.
If you follow these steps, that will walk you through how to add devices and scenes to MobiLinc HD.
Please post back if you have any questions.
Wes