Hello LincMe,
Let's see if we can get you started. I'll start off basic since I'm not sure what devices or what you've tried so far.
Harware Requirements:
- PowerLinc 2414U or 2414S
- 2 Access Points
- 1 or more Insteon/X10 devices
Software Requirements:
- SDM software. See link to download SDM on the main page.
PC Configuration:
- Make sure the PowerLinc 2414U is plugged into the USB port of the computer with SDM installed and running on it. If you have the 2414S device, plug it into a serial port on the computer running SDM.
- In the SDM window type 'dm' to show the input console.
- Type 'isResponding' and verify the response is True. If False, something isn't connected correctly, or the PowerLinc isn't responing for some reason. Try unplugging and plugging in the PowerLinc again.
iLinc iPhone/Touch Configuration:
- Under settings, enter in the IP address of the computer running the SDM software and connected to PowerLinc.
- Enter in the port number of 9020
- Go back to the main page of iLinc and go into the Insteon/X10 Modules section to add in your Insteon or X-10 devices.
See
http://www.mobileintegratedsolutions.com/utilities/forum/viewtopic.php?f=1&t=6&p=6#p6 for more detailed information on setting up the SDM software and confirming that it working with your PowerLinc.
Please post back if you have any questions.