AdminWes wrote:Hi bjuzik,
Try downloading the latest driver DB for MobiLinc: Open MobiLinc and go to your camera's settings. Select "Camera Type" and then tap "Refresh".
Reselect Amcrest and walk through the setup. On the Pan/Tilt page, see if Pan/Tilt works now by trying all profiles.
If not, please send me your external IP, port, username/password to
support@mobilinc.com so I can connect and investigate Pan/Tilt with your model.
Wes
Hi Wes,
hmmm... Even with the latest DB refresh, there does not appear to be a PTZ page to set up for Amcrest. So it would be hard to test, since it (setup) bounces back to the camera list after finding the RTSP profile?
I know you mentioned above that MobiLinc doesn't support Amcrest PTZ (as of last year), but I was hoping to perhaps resurrect interest in doing so. The Amcrest internal SW seems MUCH better than Insteon/Foscam internal SW, as well as even feature sets. I got 4 of these 1080p IP2m-841s for about $60/ea, which is very, very hard to beat. Amcrest iOS app works great...I would just like to have PTZ in MobilLinc so I can control all eight of my cameras from the same App.
Thanks!
Barry