Support for Yoluke webCam

Post your MobiLinc comments and feedback here.

Support for Yoluke webCam

Postby bmarsh » Tue Jun 16, 2020 10:19 am

Just purchased a Yoluke web cam made by Shenzhen. It is a relatively inexpensive 5MP PTZ dome camera which has ability for video, alarms, motion detection and upload of images.

Any chance of getting this supported? I can provide access to the camera. Thanks.
Last edited by bmarsh on Tue Jun 16, 2020 11:14 am, edited 1 time in total.
bmarsh
 
Posts: 7
Joined: Sat Dec 08, 2012 10:37 am

Re: Support for Yoluke webCam

Postby AdminWes » Tue Jun 16, 2020 10:41 am

Hi bmarsh,

What is the camera's RTSP address? It starts with rtsp://ip-address/streaming/1 or similar.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Support for Yoluke webCam

Postby bmarsh » Tue Jun 16, 2020 11:16 am

I sent you a PM with the details to log into the camera as admin. Did you get that?
bmarsh
 
Posts: 7
Joined: Sat Dec 08, 2012 10:37 am

Re: Support for Yoluke webCam

Postby AdminWes » Wed Jun 17, 2020 3:35 pm

Just took a quick look. That camera isn't listing the RTSP settings (if supported). It looks like it supports ONVIF, which means it *likely* supports RTSP, but it's not listed specifically.

Do you have a manual or setup software that lists the RTSP address of the camera?

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Support for Yoluke webCam

Postby bmarsh » Fri Jun 19, 2020 1:45 pm

HTTP&RTSP
HTTP Port number:
12061
(80 or 1024~49151)
RTSP Port:
554
(554 or 1024~49151)
RTMP Port:
1935
(1935 or 1024~49151)

Does that tell you enough?
bmarsh
 
Posts: 7
Joined: Sat Dec 08, 2012 10:37 am

Re: Support for Yoluke webCam

Postby AdminWes » Fri Jun 19, 2020 2:10 pm

Getting closer, but I need what the RTSP address the camera uses. It'll look like: rtsp://ip-address/streaming/1 or similar starting with rtsp://

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Re: Support for Yoluke webCam

Postby bmarsh » Tue Jun 23, 2020 12:38 pm

Found this in the doc:
Q11: RTSP Path Example
A: rtsp://192.168.1.100:554/11

But when I experiment with that, I get nothing. The camera is on my LAN as 192.168.x.xx so I don't know how you're going to use RTSP to get to it..... I've allowed port 554 thru the firewall but if it doesn't work inside the LAN, doubt if it will work for you.
bmarsh
 
Posts: 7
Joined: Sat Dec 08, 2012 10:37 am

Re: Support for Yoluke webCam

Postby AdminWes » Tue Jun 23, 2020 4:10 pm

Ok, try the FOSCAM camera type and see if any of the RTSP Profiles work. /11 is pretty common for FOSCAM cameras.

Wes
AdminWes
Site Admin
 
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm


Return to MobiLinc Feedback and Comments

Who is online

Users browsing this forum: No registered users and 2 guests

cron