Unable to connect to Panasonic IP Cam

Post any feedback and comments you have on our IP Camera support.

Unable to connect to Panasonic IP Cam

Postby rmobley » Sun May 20, 2012 12:55 pm

I have a Panasonic BL-C210 and unable to setup. I am getting a "Profile Match Not found". Camera is accesable from IE and other programs.
rmobley
 
Posts: 5
Joined: Sun May 20, 2012 6:50 am

Re: Unable to connect to Panasonic IP Cam

Postby AdminWes » Mon May 21, 2012 6:13 am

Hi rmobley,

Based on the Panasonic developer API, MJPEG profiles 1, 4, or 5 should work. If the plug-in was unable to find a matching profile, please double check the settings of the camera. The most common problem is a mismatch between the IP:Port and username/password compared to the actual camera settings.

One thing to try is to attempt to connect to your camera using Safari on your iOS device using the settings in MobiLinc to verify your iOS device can see your camera.

Here is a forum post with other recommendations to troubleshoot: http://forum.mobileintegratedsolutions.com/viewtopic.php?f=55&t=2421

If you are still unable to get this working, it's possible that our profiles are not compatible with this particular model. Would you be willing to allow us to connect to your camera to verify?

Wes
AdminWes
Site Admin
 
Posts: 2152
Joined: Sat Feb 07, 2009 2:52 pm

Re: Unable to connect to Panasonic IP Cam

Postby AdminWes » Tue May 22, 2012 6:59 am

Hi rmobley,

Also, please verify that the IP address field is all lowercase AND that http:// is NOT included as part of the IP Address field.

The IP Address field should read as:
myipcamera.domain.com NOT http://myipcamera.domain.com.
Use your dynamic DNS in place of the example.

Wes
AdminWes
Site Admin
 
Posts: 2152
Joined: Sat Feb 07, 2009 2:52 pm

Re: Unable to connect to Panasonic IP Cam

Postby Bai0524 » Tue May 29, 2012 10:15 pm

AdminWes Thanks for taking time to help!!!
Bai0524
 
Posts: 1
Joined: Tue May 29, 2012 9:37 pm


Return to Feedback and Comments

Who is online

Users browsing this forum: No registered users and 1 guest

cron