Using a smarthome IP camera with Mobilinc

Post any feedback and comments you have on our IP Camera support.

Using a smarthome IP camera with Mobilinc

Postby osurh18 » Thu Dec 06, 2012 8:39 pm

Guys I have installed a smarthome camera and can view the camera through the IP address. I have also purchased the camera add-in for my mobilinc. However when I try to add the camera it cannot connect.

I've put in the following info:

Name - Camera1
CameraType - Smarthome
IP 192.168.1.120
Port 21 (I'm not sure if this is correct) Can you please help me figure out the correct port #
User name and password is the default
HTTPS is Off
Refresh is 2

Any help is appreciated
osurh18
 
Posts: 5
Joined: Thu Mar 22, 2012 7:36 am

Re: Using a smarthome IP camera with Mobilinc

Postby osurh18 » Thu Dec 06, 2012 8:50 pm

I got it to work via my wifi (port was 80). However over 3G it does not work....suggestions? The rest of my insteon network does work over 3G using the Mobilinc App
osurh18
 
Posts: 5
Joined: Thu Mar 22, 2012 7:36 am

Re: Using a smarthome IP camera with Mobilinc

Postby AdminWes » Fri Dec 07, 2012 6:08 am

Hi there,

Yes, the default port is port 80.

To access your camera outside of your network, please see this post:
http://forum.mobilinc.com/viewtopic.php?f=55&t=2423&sid=65512a19d6fb7eefed56c0abda24f583

Wes
AdminWes
Site Admin
 
Posts: 2152
Joined: Sat Feb 07, 2009 2:52 pm


Return to Feedback and Comments

Who is online

Users browsing this forum: No registered users and 1 guest

cron