how can i connect insteon hub

Post your MobiLinc comments and feedback here.

how can i connect insteon hub

Postby Bmbuell » Tue Aug 20, 2013 11:22 pm

how can i connect insteon hub
Bmbuell
 
Posts: 2
Joined: Tue Aug 20, 2013 11:12 pm

Re: how can i connect insteon hub

Postby AdminWes » Wed Aug 21, 2013 6:28 am

Hi Bmbuell,

MobiLinc does not currently support the HUB. We are considering support for this device, but do not have a timeline yet for commitment or release.

Wes
AdminWes
Site Admin
 
Posts: 2152
Joined: Sat Feb 07, 2009 2:52 pm

Re: how can i connect insteon hub

Postby Bmbuell » Wed Aug 21, 2013 7:13 am

To bad!
Bmbuell
 
Posts: 2
Joined: Tue Aug 20, 2013 11:12 pm

Re: how can i connect insteon hub

Postby rahulus » Wed Jan 08, 2014 5:45 pm

Hi, has there been any update on this? Obviously the smartlinc devices have been discontinued so I am keen to get my Hub setup working with Mobilinc.

Many thanks
rahulus
 
Posts: 1
Joined: Wed Jan 08, 2014 5:44 pm

Re: how can i connect insteon hub

Postby AdminWes » Wed Jan 08, 2014 7:22 pm

Hi rahulus,

I don't have any further update on the HUB. We are busy working to get our iOS 7 update to MobiLinc out the door and into the community along with several new features we are excited about.

If you are in the market for a SmartLinc replacement, I HIGHLY recommend the ISY controller as it works great with MobiLinc and our MobiLinc Connect cloud service: http://mobilincstore.com/system/isy-994i-plm-combo.html

Wes
AdminWes
Site Admin
 
Posts: 2152
Joined: Sat Feb 07, 2009 2:52 pm

Re: how can i connect insteon hub

Postby Brandon477 » Tue Mar 04, 2014 2:16 pm

NOOOOOOOOOO. My smarlinc died and they replaced it with an Insteon hub at no charge. I just found out that the hub does not work with mobilinc?? And you just added voice control???!?? Is there any timeline for possible support for the hub? It's a shame I spent $50 on a great product I can no longer use.. Thank you
Brandon477
 
Posts: 1
Joined: Tue Mar 04, 2014 2:09 pm

Re: how can i connect insteon hub

Postby AdminWes » Wed Mar 05, 2014 6:59 am

Hi Brandon477,

I do not have a timeline for HUB support.

If you are considering a differnet controller, I HIGHLY recommend the ISY controller as it works great with MobiLinc and our MobiLinc Connect cloud service: http://mobilincstore.com/system/isy-994i-plm-combo.html

Wes
AdminWes
Site Admin
 
Posts: 2152
Joined: Sat Feb 07, 2009 2:52 pm

Re: how can i connect insteon hub

Postby seifrij » Wed Jun 04, 2014 9:25 am

Hmmm.... so another 3 months has gone by. Any update on Insteon HUB support. Lots of 2412N's dying out there, including mine. And frankly, Insteon's new app can't hold a candle to Mobilinc. C'mon team - support the HUB !!

Please - update?
seifrij
 
Posts: 1
Joined: Fri Aug 30, 2013 10:22 am

Re: how can i connect insteon hub

Postby tlarrain » Sat Jul 05, 2014 11:17 am

ISY doesn't work in countries with 50 Hz ( it does but no modem will do), so the Hub is the only choice. Mobilinc is loosing worldwide customers for not supporting the Hub.
tlarrain
 
Posts: 1
Joined: Sat Jul 05, 2014 11:14 am

Re: how can i connect insteon hub

Postby AdminWes » Sat Jul 05, 2014 4:26 pm

Hi tlarrain,

Just to clarify, only the powerline feature of INSTEON with the PLM will not work on 50Hz, however, the dual-band RF segment will since this is independant of power frequency. Once the signal from the PLM goes RF, this will transmit to all other 915MHz RF INSTEON devices within range and repeat through the home on RF and 50Hz courtesy of the newer INSTEON 50/60Hz dual-band devices like the SwitchLinc.

You'd need to check with each RF capable device to see which frequency it's RF is transmitting on, but the new Dual-Band SwitchLinc products are 50/60 Hz compatible and transmit on the same RF frequency as the PLM (915MHz).

Wes
AdminWes
Site Admin
 
Posts: 2152
Joined: Sat Feb 07, 2009 2:52 pm

Next

Return to MobiLinc Feedback and Comments

Who is online

Users browsing this forum: No registered users and 2 guests

cron