AXIS 240Q Video Server

Post any feedback and comments you have on our IP Camera support.

AXIS 240Q Video Server

Postby marcin » Sat Apr 18, 2015 8:30 pm

I have AXIS 240Q Video Server with four cameras attached to it, when i added first camera to ML i used ip address ( port 80 and i received stream for JPG and MJPG which is great! When I attempted to add second camera from this same server to ML using:
Local http://:
Local Port: 80
Local http://:
Local Port: 80

No luck.... I tried different variations by selecting manufacture as AXIS and no luck. When I paste those links in web browser i can see the image. ... F&camera=2 ... F&camera=2

Any help would be greatly appreciated.
Posts: 1
Joined: Sat Apr 18, 2015 8:21 pm

Re: AXIS 240Q Video Server

Postby AdminWes » Sun Apr 19, 2015 5:54 pm

Hi marcin,

The format you have listed lines up with MobiLinc's Axis JPEG Profile 2 and MJPEG Profile 2.

If you select Axis for the camera type and just enter in the IP address, port number, username, and password and enter in the camera number you should be able to see that camera via Profile 2 for both JPEG and MJPEG in the setup steps.

If you can't get it working, please send us the following at:

- External IP
- Port
- Username/Password

We'll connect and verify the settings with MobiLinc from the lab.

Site Admin
Posts: 2153
Joined: Sat Feb 07, 2009 2:52 pm

Return to Feedback and Comments

Who is online

Users browsing this forum: No registered users and 1 guest